Full Automatic Terminal Crimping Machineproduct description
Full Automatic Terminal Crimping Machine
This machine is specially designed for producing thin wire material, and uses the pad blade for adjusting the stripping length to achieve fine and precise dimensions.
The three phase speeds up to 55 wires per minute plug automated configuration and adjustment of time consumed in wire cutting, stripping, crimping, wire twisting and tin dipping.
Electrically controlled inching for easy adjustment of mold and step-by-step actions.
The front stripping swing-arm (guide pipe) controls wire retaining with a cam, avoiding erroneous movements by changes in speed of the main shaft, keeping total cutting lengths.
A server motor is used to keep the large and accurate feeding torque and length.
Using server motor for wire feeding with fixed dimensions providing large torque and more precise wire feeding length.
|Power supply||AC 220V 50 / 60 HZ 1 phases|
|Wire size||AWG# 20~30（Standard）|
|Air pressure||5~6 kg/cm2 G|
|Crimping force||1.2 Ton|
|Cutting length||40~9,999 mm（Standard）|
|Stripping length||NO.1、NO.2 Crimping side 0~10 mm|
|Stripping deep||100 action 2.4 mm（1 action＝0.024 mm）|
|Capacity||Cutting wire, stripping on one end, stripping both ends, crimping on one end, crimping both ends, twister on one end(optional equipments twister)|
|Detectors equipped||Wire overload, wire load, terminal overload, terminal load, strip miss, crimp miss, air presser low, wire joint.|
|Dimensions||1,200 L×1,200 W×2,000 H mm|
|Weight||Approx. 520 Kgs|